Monitoring the Running Status of an IPv4 Multicast VPN

During routine maintenance of an IPv4 multicast VPN, you can run the display commands in any view to obtain the running status of the IPv4 multicast VPN.

Context

You can run the following commands in any view to check the running status of an IPv4 multicast VPN.

Procedure

Run the display multicast-domain vpn-instance vpn-instance-name share-group [ local ] command in any view to check Share-Group information about a specified VPN instance in a multicast domain (MD).
Run the following commands in any view to check switch-group information received by a specified VPN instance in an MD.
- display multicast-domain vpn-instance vpn-instance-name switch-group receive brief
- display multicast-domain vpn-instance vpn-instance-name switch-group receive [ active | group group-address | sender source-address | vpn-source-address [ mask { source-mask-length | source-mask } ] | vpn-group-address [ mask { group-mask-length | group-mask } ] ] ^*
Run the display multicast-domain vpn-instance vpn-instance-name switch-group send [ group group-address | reuse interval | vpn-source-address [ mask { source-mask-length | source-mask } ] | vpn-group-address [ mask { group-mask-length | group-mask } ] ] ^* command in any view to check the switch-group information sent by a specified VPN instance in an MD.
Run the display multicast-domain { vpn-instance vpn-instance-name | all-instance } control-message counters command in any view to check the statistics about sent and received MDT switch messages in a specified VPN instance or all VPN instances.
Run the display multicast-domain { vpn-instance vpn-instance-name | all-instance } invalid-packet command in any view to check the statistics about invalid MDT switch messages received by a device.