After configuring IGMP Policy Control, verify the IGMP configuration and IGMP operating status.
Prerequisites
IGMP policy control has been configured.
Procedure
- Run the display igmp [ vpn-instance vpn-instance-name | all-instance ] interface [ interface-type interface-number | up | down ] [ verbose ] command to check the configurations and operating status of IGMP on an interface.
- Run the display cp-rate-limit [ slot slot-id ] [ verbose ] command to check the configuration about all the users that use IGMP packets to launch attacks.
- Run the display cp-rate-limit interface interface-type interface-number [ vlan vlan-id ] [ verbose ] command to check the configuration about the attackers on a specified interface.
- Run the display cp-rate-limit interface interface-type interface-number pe-vid pe-vid ce-vid ce-vid [ verbose ] command to check the configuration about the attackers on a QinQ interface.