Verifying the Configuration of Statistics Collection of IPv4 Original Flows

In routine maintenance or after NetStream configurations are complete, you can run the display commands in any view to view the running status of NetStream functions.

Procedure

Run the display ip netstream cache origin [ source-ip source-ip ] [ source-port source-port ] [ destination-ip destination-ip ] [ destination-port destination-port ] [ protocol { udp | tcp | protocol-number } ] [ time-range from start-time to end-time ] [ source-interface { source-interface-type source-interface-num | source-interface-name } ] [ destination-interface { destination-interface-type destination-interface-num | destination-interface-name } ] slot slot-id command to check information about the NetStream buffer.

If the netstream sampling function configured in the outbound logical interface, running the command can only display the information about the NetStream buffer of the physical interface on which the logical interface configured.
Run the display ip netstream statistics slot slot-id command to check statistics about NetStream flows.
Run the display ip netstream statistics interface { interface-name | interface-type interface-number } command to check statistics about sampled packets on an interface.
Run the display netstream { all | global | interface interface-type interface-number } command to check NetStream configurations in different views.
Run the display ip netstream monitor { all | monitor-name } command to check the monitoring information about IPv4 original flows.
Run the display ip netstream cache origin statistics slot slot-id to check original flow table specifications and the number of current flows of a specific board.
Run the display ip netstream cache [ source-ip source-ip ] [ source-port source-port ] [ destination-ip destination-ip ] [ destination-port destination-port ] [ protocol { tcp | udp | protocol-number } ] [ time-range from start-time to end-time ] [ interface { interface-name | interface-type interface-num } ] [ type { ipv4 | mpls } ] slot slot-id command to query the sampling information of the original flows in the NetStream IPv4 or MPLS buffer based on the 5-tuple information.