In routine maintenance or after pertaining configurations of NetStream are complete, you can run the display commands in any view to check whether NetStream is enabled on the device.
Procedure
- Run the display ip netstream cache { as | as-tos | bgp-nexthop-tos | bgp-community | destination-prefix | destination-prefix-tos | index-tos | mpls-label | prefix | prefix-tos | protocol-port | protocol-port-tos | source-prefix | source-prefix-tos | source-index-tos | vni-sip-dip | vlan-id | flexflowtpl record-name } slot slot-id command to check flows aggregated in different modes in the buffer.
- Run the display
ip netstream statistics slot slot-id command to check statistics about NetStream flows.
- Run the display ip netstream statistics interface { interface-name | interface-type interface-number } command to check statistics about sampled packets on an interface.
- Run the display netstream { all | global | interface interface-type interface-number } command to check NetStream configurations in different views.
- Run the display ip netstream cache aggregation statistics slot slot-id command to check aggregation flow table specifications and the number of current flows of a specific board.