Configuring a Flexible Flow Statistics Template

When configuring the flexible flow statistics output function, configure a flexible flow statistics template, customize matching and collected fields, and apply the template to an interface.

Procedure

Run system-view
The system view is displayed.
Run ipv6 netstream record record-name
An IPv6 flexible flow statistics template is created, and its recording view is displayed.
Run match { { source | destination } { vlan | as | port | address | mask } | mpls top-label ip-address | mpls label position | { protocol | tos | direction | tcp-flag } | { input | output } interface | next-hop [ bgp ] }
Aggregation keywords of the flexible flow statistics template are configured.
(Optional) Run collect { { first | last } switched | input { packets | bytes } length }
The flexible flow statistics sent to the NSC is configured to contain the number of bytes, number of packets, and first and last forwarding time.
Run commit
The configuration is committed.