Verifying the Configuration of Statistics Collection of IPv6 Aggregated Flows

In routine maintenance or after NetStream configurations are complete, you can run the display commands in any view to check whether NetStream is enabled on the device.

Context

Run the following command to check the previous configuration.

Procedure

Run the display ipv6 netstream cache { as | as-tos | bgp-nexthop-tos | destination-prefix | destination-prefix-tos | index-tos | prefix | prefix-tos | protocol-port | protocol-port-tos | source-prefix | source-prefix-tos | mpls-label | vlan-id | flexflowtpl record-name } slot slot-id command to check various aggregated flows in the buffer.
Run the display ipv6 netstream statistics slot slot-id command to check statistics about NetStream flows.
Run the display ip netstream statistics interface { interface-name | interface-type interface-number } command to check statistics about sampled packets on an interface.
Run the display netstream { all | global | interface interface-type interface-number } command to check NetStream configurations in different views.
Run the display ip netstream cache aggregation statistics slot slot-id command to check aggregation flow table specifications and the number of current flows of a specific board.