(Optional) Configuring NTP Authentication in Broadcast Mode

After NTP authentication is enabled, you can configure the authentication key ID used in synchronization with the NTP broadcast server on the local router to apply NTP authentication in broadcast mode. Perform the following steps on the NTP broadcast server.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The interface view is displayed.

  3. Run ntp-service broadcast-server [ authentication-keyid key-id | version version-number | port port-number ] *

    The authentication key ID used by the NTP broadcast server is configured.

  4. Run commit

    The configuration is committed.

Parent Topic: Configuring NTP Security Mechanisms
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >