(Optional) Configuring NTP Authentication in Manycast Mode

By configuring the authentication key ID used in the synchronization with the NTP manycast client on the local router, you can apply NTP authentication in manycast mode.

Procedure

Run system-view
The system view is displayed.
Run interface interface-type interface-number
The interface view is displayed.
Run ntp-service manycast-client [ ip-address | ipv6 [ ipv6-address ] ] [ [ authentication-keyid key-id ] | ttl ttl-number | port port-number ] ^*
The authentication key ID used by the NTP manycast client is configured.
Run commit
The configuration is committed.