Configuring the Function to Suppress the Advertisement of Interface Addresses

This section describes how to configure the function to suppress the advertisement of interface addresses so that interface addresses can be reused.

Procedure

  • Configuring the function to suppress the advertisement of all interface addresses in an OSPF process
    1. Run system-view

      The system view is displayed.

    2. Run ospf [ process-id ]

      The OSPF process view is displayed.

    3. Run suppress-reachability

      The suppresses the advertisement of all interface addresses in an OSPF process is configured.

    4. Run commit

      The configuration is committed.

  • Configuring an OSPF interface to suppress the advertisement of interface addresses
    1. Run system-view

      The system view is displayed.

    2. Run interface interface-type interface-number

      The OSPF interface view is displayed.

    3. Run ospf suppress-reachability

      An OSPF interface to suppress the advertisement of interface addresses is configured.

    4. Run commit

      The configuration is committed.

Parent Topic: Adjusting the OSPF Network Convergence Speed
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >