OSPF supports the network management function. You can bind the OSPF MIB to an OSPF process and configure trap and log functions.
Through the Simple Network Management Protocol (SNMP), the OSPF Management Information Base (MIB) manages information exchanged between the NMS and agents.
Before configuring the network management function of OSPF, complete the following tasks:
Configure a link layer protocol.
Configure IP addresses for interfaces to ensure that neighboring nodes are reachable at the network layer.
The system view is displayed.
The OSPF process is bound to the MIB.
The configuration is committed.
Run the following commands to check the previous configuration.
Run the display ospf [ process-id ] brief command to view information about the binding of OSPF MIBs and OSPF processes.