(Optional) Disabling OSPF IP FRR on an Interface

If an interface runs key services, ensure that the backup path does not pass through this interface so that services will not be affected after FRR calculation.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The view of an OSPF interface on which FRR is enabled is displayed.

  3. Run ospf frr block

    FRR is blocked on the OSPF interface.

  4. (Optional) Run ospf remote-lfa disable

    Interfaces of the specified level are disabled from being calculated as the Remote LFA next hop.

  5. Run commit

    The configuration is committed.

Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >