Disabling an OSPF Multi-Area Adjacency Interface from Creating BFD Sessions

After BFD for OSPF is configured, all interfaces on which neighbor relationships are in Full state in the OSPF process create BFD sessions. You can disable an interface from creating BFD sessions as required.

Procedure

Run system-view
The system view is displayed.
Run interface interface-type interface-number
The interface view is displayed.
Run ospf enable [ process-id ] area area-id
OSPF is enabled on the interface.
Run ospf enable multi-area area-id
OSPF is enabled on the multi-area adjacency interface.
Run ospf bfd block multi-area area-id
The OSPF multi-area adjacency interface is disabled from creating BFD sessions.
Run commit
The configuration is committed.