After setting OSPF route attributes, verify information about OSPFv3 interfaces and the routing table.
Prerequisites
OSPFv3 route attributes have been configured.
Procedure
- Run the display ospfv3 [ process-id ] interface [ no-peer | area area-id ] [ interface-type interface-number ] command in any view to view information about an OSPFv3 interface.
- Run the display ospfv3 [ process-id ] routing command in any view to view information about an OSPFv3 routing table.
- Run the display ospfv3 [ process-id ] ecmp-group command in any view to view information about OSPFv3 ECMP groups.