Verifying the Configuration of OSPFv3 Routing Information Control

After controlling OSPFv3 routing information, verify the OSPFv3 LSDB.

Prerequisites

OSPFv3 routing information has been controlled.

Procedure

  • Run the display ospfv3 [ process-id ] lsdb command to view the OSPFv3 LSDB.
  • Run either of the following commands to check OSPFv3 route information:

    • Run the display ospfv3 [ process-id ] abr-summary-list [ ipv6-address prefix-length ] command to check information about the summarized routes on an ABR.

    • Run the display ospfv3 [ process-id ] asbr-summary [ ipv6-address prefix-length ] [ verbose ] command to check information about the summarized routes on an ASBR.

Parent Topic: Controlling OSPFv3 Routing Information
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic