Enabling and Disabling the PADS
This section describes how to set the PADS function status when the PADS is used.
Context
This configuration process is supported only on the Admin-VS.
The protocol-aided diagnosis system (PADS) is an intelligent diagnosis system. It simulates service experts to be online for 7 x 24 hours and to implement automatic service fault prevention, discovery, and diagnosis from end to end. The PADS also supports automatic fault recovery with the help of the self-healing system. By default, the function is enabled. To disable the PADS function, perform the following steps.
Procedure
- Run system-view
The system view is displayed.
- Choose either of the following methods to disable the PADS function.
To disable the PADS function globally, run the pads disable command.
To disable the PADS function of a specific feature, run the pads switch module-name disable command.
If the pads switch command is not run, the status of functions in the protocol-aided diagnosis system is determined by the pads disable command. If the pads switch command is run, the status of a specific function in the protocol-aided diagnosis system is determined by the pads switch command no matter the status of the entire protocol-aided diagnosis system is enabled or disabled.
- Run commit
The configuration is committed.