After configuring IP services on the VLAN tag termination sub-interface, verify the configuration.
Prerequisites
The configurations of the VLAN tag termination sub-interface to transmit IP services are complete.
Procedure
- Run the display dot1q information termination [ interface {interface-name |interface-type interface-number } ] command to check information about the dot1q VLAN tag termination sub-interface.
- Run the display qinq information termination [ interface {interface-name|interface-type interface-number } ] command to check information about the QinQ VLAN tag termination sub-interface.
- Run the display vrrp command to check information about the VRRP group.
- Run the display dhcp relay address all command to check the DHCP configuration on the interface that has DHCP relay enabled.