Verifying the VPN Service Configuration on the VLAN Tag Termination Sub-interface

Procedure

• Run the display dot1q information termination [ interface {interface-name |interface-type interface-number } ] command to check information about the dot1q VLAN tag termination sub-interface.
• Run the display qinq information termination [ interface {interface-name|interface-type interface-number } ] command to check information about the QinQ VLAN tag termination sub-interface.
• View the configuration of the L2VPN in CCC mode.

  • Run the display vll ccc [ ccc-name | type { local | remote } ] command to check information about the CCC connection.

  • Run the display l2vpn ccc-interface vc-type ccc [ up | down ] command to check information about the interface in the Up or Down state.

• View the configuration of the L2VPN in LDP mode.

  • Run the display mpls l2vc [ vc-id | interface interface-type interface-number ] command to check Martini VLL connection information on the local PE.

  • Run the display mpls l2vc remote-info [ vc-id ] command to check information about the remote Martini MPLS L2VPN connection on the PE.

• Run the display ip vpn-instance verbose [ vpn-instance-name ] command to check VPN instance information.
• Run the display bgp [ vpnv4 vpn-instance vpn-instance-name ] peer command to check information about BGP peers.