Verifying the L2VPN Service Configuration on the QinQ Stacking Sub-interface

After you configure an L2VPN service on a QinQ stacking sub-interface, verify the configuration

The configurations of the sub-interface for QinQ stacking to provide L2VPN access are complete.

Run the display qinq information stacking [ interface interface-type interface-number [ .subinterface-number ] ] command to check QinQ stacking information.
View the configuration of the L2VPN in CCC mode.
- Run the display vll ccc [ ccc-name | type { local | remote } ] command to check information about the CCC connection.
- Run the display l2vpn ccc-interface vc-type ccc [ up | down ] command to check information about the interface in the Up or Down state.
View the configuration of the L2VPN in LDP mode.
- Run the display mpls l2vc [ vc-id | interface interface-type interface-number ] command to check Martini VLL connection information on the local PE.
- Run the display mpls l2vc remote-info [ vc-id ] command to check information about the remote Martini MPLS L2VPN connection on the PE.