After configuring routing loop prevention, verify the running
status of RIPng, information about interfaces, and RIPng routing information.
Prerequisites
Routing loop prevention has been configured.
Procedure
- Run the display ripng [ process-id | vpn-instance vpn-instance-name ]
command to check the current operating status and configuration of
RIPng.
- Run the display ripng process-id route [ destination-address destination-address [ mask-length ] ] [ interface interface-type interface-number [ neighbor-address neighbor-address ] ] command to check RIPng routes.
- Run the display ripng process-id interface command to check information
about RIPng interfaces.