Debugging RIPng

A device generates debugging information after you enable debugging of modules in the user view. Debugging information shows the contents of the packets sent or received by the debugged modules.

Context

Debugging affects system performance. Therefore, after debugging, run the undo debugging all command to disable it immediately.

When a RIPng fault occurs, run any of the following debugging commands in the user view to debug RIPng and locate the fault.

Procedure

  1. Run the debugging ripng process-id [ error | event | job | backup | interface interface-type interface-number | packet [ interface-type interface-number [neighbor neighbor-address ] ] [ route acl-number ] | route-processing [ acl-number ] ] command to debug the specified RIPng process.
  2. Run the debugging ripng miscellaneous command to debug component-level RIPng information.
Parent Topic: Maintaining RIPng
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic