Controlling the Sending and Receiving of RIPng Packets

By controlling the sending and receiving of RIPng packets, you can optimize the RIPng performance.

Applicable Environment

To meet the requirements of complex networking, accurately control the sending and receiving of RIPng packets.

Pre-configuration Tasks

Before configuring a router to control the sending and receiving of RIPng packets, complete the following tasks:

Configure IPv6 addresses for interfaces to ensure that neighboring nodes are reachable at the network layer.
Configuring Basic RIPng Functions

Configuration Procedure

Perform one or more of the following configuration tasks (excluding "Checking the Configuration") as required.

Disabling Receiving of RIPng Packets on an Interface: Disabling interfaces from receiving RIPng packets is a method of preventing routing loops.

Disabling Sending of RIPng Packets on an Interface: Disabling an interface from sending RIPng packets is a method of preventing routing loops.

Setting the Interval for Sending Update Packets and the Maximum Number of Packets Sent Each Time: By setting the interval for sending packets and the maximum number of packets to be sent each time, you can optimize the RIPng performance.

Verifying the Configuration of Controlling the Sending and Receiving of RIPng Packets: After controlling the sending and receiving of RIPng packets, verify the routing information in the RIPng database.

Parent Topic: RIPng Configuration

Copyright © Huawei Technologies Co., Ltd.

Copyright © Huawei Technologies Co., Ltd.

< Previous topic Next topic >