Verifying the Configuration for a Device to Communicate with an NMS Using SNMPv1

After configuring basic SNMPv1 functions, verify the configuration.

Basic SNMPv1 functions have been configured.

Run the display snmp-agent community command to check the configured community name.
Run the display snmp-agent sys-info version command to check the enabled SNMP version.
Run the display acl acl-number command to check the rules in the specified ACL.
Run the display snmp-agent mib-view command to check the MIB view.
Run the display snmp-agent mib modules command to check information about a loaded MIB file.
Run the display snmp-agent sys-info contact command to check the device administrator's contact information.
Run the display snmp-agent sys-info location command to check the location of the router.
Run the display current-configuration configuration snmp command to view the current configuration of SNMP.
Run the display snmp-agent vacmgroup command to check all the configured View-based Access Control Model (VACM) groups.
Run the display snmp-agent target-host command to check information about the target host.