Verifying the Configuration for a Device to Communicate with an NMS Using SNMPv3 USM User

After configuring basic SNMPv3 functions, verify the configuration.

Basic SNMPv3 functions have been configured.

Run the display snmp-agent usm-user [ engineid engineid | group group-name | username user-name ] ^* command to check user information.
Run the display snmp-agent sys-info version command to check the enabled SNMP version.
Run the display acl acl-number command to check the rules in the specified ACL.
Run the display snmp-agent mib-view command to check the MIB view.
Run the display snmp-agent mib-view command to check information about a loaded MIB file.
Run the display snmp-agent sys-info contact command to check the device administrator's contact information.
Run the display snmp-agent sys-info location command to check the location of the router.
Run the display current-configuration | include max-size command to check the allowable maximum size of an SNMP packet.
Run the display current-configuration | include trap command to check trap configuration.
Run the display snmp-agent target-host command to check information about the target host.
Run the display snmp-agent inform [ host-name host-name | [ address udp-domain ip-address [ vpn-instance vpn-instance-name ] params securityname security-name ] ] command to check inform parameters of all target hosts or a specified target host and information about host statistics.
Run the display snmp-agent vacmgroup command to check all the configured View-based Access Control Model (VACM) groups.