Verifying the IS-IS SR-MPLS BE Tunnel Configuration

After configuring an SR-MPLS BE tunnel, verify the configuration of the SR-MPLS BE tunnel.

The SR-MPLS BE functions have been configured.

After completing the configurations, you can run the following commands to check the configurations.

Run the display isis lsdb [ { level-1 | level-2 } | verbose | { local | lsp-id | is-name symbolic-name } ] ^* [ process-id | vpn-instance vpn-instance-name ] command to check IS-IS LSDB information.
Run the display segment-routing prefix mpls forwarding command to check the label forwarding information base for Segment Routing.