Verifying the OSPF SR-MPLS TE Tunnel Configuration

After configuring an automatic SR-MPLS TE tunnel, verify information about the SR-MPLS TE tunnel and its status statistics.

Prerequisites

The SR-MPLS TE tunnel functions have been configured.

Procedure

  1. Run the display ospf [ process-id ] segment-routing routing [ ip-address [ mask | mask-length ] ] command to check routing table information of OSPF Segment Routing.
  2. Run the display mpls te tunnel [ destination ip-address ] [ lsp-id lsr-id session-id local-lsp-id | lsr-role { all | egress | ingress | remote | transit } ] [ name tunnel-name ] [ { incoming-interface | interface | outgoing-interface } interface-type interface-number ] [ verbose ] command to check tunnel information.
  3. Run the display mpls te tunnel statistics or display mpls sr-te-lsp command to check LSP statistics.
  4. Run the display mpls te tunnel-interface [ tunnel tunnel-number ] command to check information about a tunnel interface on the ingress.
Parent Topic: Configuring an OSPF SR-MPLS TE Tunnel (Path Computation on a Forwarder)
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic