After configuring SR-MPLS TE Policies, verify the configuration.
Prerequisites
SR-MPLS TE Policies have been configured.
Procedure
- Run the display sr-te policy [ endpoint ipv4-address color color-value | policy-name name-value ] command to check SR-MPLS TE Policy details.
- Run the display sr-te policy statistics command to check SR-MPLS TE Policy statistics.
- Run the display sr-te policy status { endpoint ipv4-address color color-value | policy-name name-value } command to check SR-MPLS TE Policy status to determine the reason why a specified SR-MPLS TE Policy cannot go up.
- Run the display sr-te policy last-down-reason [ endpoint ipv4-address color color-value | policy-name name-value ] command to check records about events where SR-MPLS TE Policies or segment lists in SR-MPLS TE Policies go down.
- Run the display ip vpn-instance vpn-instance-name tunnel-info nexthop nexthopIpv4Addr command to display information about the iterations of the routes that match the nexthop under each address family in the current VPN instance.
- Run the display evpn vpn-instance [ name vpn-instance-name ] tunnel-info command to displays information about the tunnel associated with the EVPN instance.
- Run the display evpn vpn-instance name vpn-instance-name tunnel-info nexthop nexthopIpv4Addr command to display information about a tunnel associated with an EVPN with a specified next-hop address.