Configuring SRv6 TE Policy Status Advertisement to BGP-LS

Configure a forwarder to advertise SRv6 TE Policy status to BGP-LS. BGP-LS can then advertise the status to peers.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run segment-routing ipv6

    SRv6 is enabled, and the SRv6 view is displayed.

  3. Run srv6-te-policy bgp-ls enable

    The forwarder is enabled to advertise SRv6 TE Policy status to BGP-LS.

  4. Run commit

    The configuration is committed.

Parent Topic: Configuring an SRv6 TE Policy (Dynamic Delivery by a Controller)
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >