Configuring SRv6 TE Policy Traffic Statistics Collection

This section describes how to configure SRv6 TE Policy traffic statistics collection.

Context

SRv6 TE Policy traffic statistics collection enables you to collect statistics about the traffic forwarded through a specified or all SRv6 TE Policies.

This function supports both global configuration and single-policy configuration. If global configuration and single-policy configuration both exist, the single-policy configuration takes effect.

Procedure

Global configuration
1. Run system-view
  The system view is displayed.
2. Run segment-routing ipv6
  The SRv6 view is displayed.
3. Run srv6-te-policy traffic-statistics enable
  Traffic statistics collection is enabled for all SRv6 TE Policies.
4. Run commit
  The configuration is committed.
Single-policy configuration
1. Run system-view
  The system view is displayed.
2. Run segment-routing ipv6
  The SRv6 view is displayed.
3. Run srv6-te policy name-value
  The SRv6 TE Policy view is displayed.
4. Run traffic-statistics { enable | disable }
  Traffic statistics collection is configured for the specified SRv6 TE Policy.
5. Run commit
  The configuration is committed.

Verifying the Configuration

After configuring SRv6 TE Policy traffic statistics collection, run the display srv6-te policy traffic-statistics [ endpoint ipv6-address color color-value | policy-name name-value | binding-sid binding-sid ] command to check collected SRv6 TE Policy traffic statistics.

Follow-up Procedure

To clear existing SRv6 TE Policy traffic statistics, run the reset srv6-te policy traffic-statistics [ endpoint ipv6-address color color-value | policy-name name-value | binding-sid binding-sid ] command.