Verifying the SRv6 TE Policy Configuration

Procedure

1. Run the display srv6-te policy [ endpoint endpoint-ip color color-value | policy-name name-value | binding-sid binding-sid ] command to check SRv6 TE Policy details.
2. Run the display srv6-te policy statistics command to check SRv6 TE Policy statistics.
3. Run the display srv6-te policy status { endpoint endpoint-ip color color-value | policy-name name-value | binding-sid binding-sid } command to check SRv6 TE Policy status to determine the reason why a specified SRv6 TE Policy cannot go up.
4. Run the display srv6-te policy last-down-reason { endpoint endpoint-ip color color-value | policy-name name-value | binding-sid binding-sid } command to check records about events where SRv6 TE Policies or segment lists in SRv6 TE Policies go down.
5. Run the ping srv6-te policy { policy-name policyname | endpoint-ip endpointipv6 color colorid | binding-sid bsid } [ end-op endop ] [ -a sourceaddr6 | -c count | -m interval | -s packetsize | -t timeout | -tc tc | -h hoplimit ] * command with the policy-name policyname, endpoint-ip endpointipv6 color colorid, or binding-sid bsid parameter configured to ping the specified SRv6 TE Policy to check its connectivity.
6. Run the display srv6-te flow-group command to check SRv6 TE flow group details.