Verifying the RSVP-TE Tunnel Configuration

Procedure

• Run the display mpls te link-administration bandwidth-allocation [ interface interface-type interface-number ] command to check the allocated link bandwidth information.
• Run the display ospf [ process-id ] mpls-te [ area area-id ] [ self-originated ] command to check OSPF TE information.
• Run either of the following commands to check the IS-IS TE status:
  • display isis traffic-eng advertisements [ lsp-id | local ] [ level-1 | level-2 | level-1-2 ] [ process-id | vpn-instance vpn-instance-name ]
  • display isis traffic-eng statistics [ process-id | vpn-instance vpn-instance-name ]
• Run the display explicit-path [ [ name ] path-name ] [ verbose ] command to check the configured explicit paths.
• Run the display mpls te cspf destination ip-address [ affinity { properties [ mask mask-value ] | { { include-all | include-any } { pri-in-name-string } &<1-32> | exclude { pri-ex-name-string } &<1-32> } ^* } | bandwidth ct0 ct0-bandwidth | explicit-path path-name | hop-limit hop-limit-number | metric-type { igp | te } | priority setup-priority | srlg-strict exclude-path-name | tie-breaking { random | most-fill | least-fill } ] ^* [ hot-standby [ explicit-path hsb-path-name | overlap-path | affinity { hsb-properties [ mask hsb-mask-value ] | { { include-all | include-any } { hsb-in-name-string } &<1-32> | exclude { hsb-ex-name-string } &<1-32> } ^* } | hop-limit hsb-hop-limit-number | srlg { preferred | strict } ] ^* ] command to check the path that is calculated using CSPF based on specified conditions.
• Run the display mpls te cspf tedb { all | area area-id | interface ip-address | network-lsa | node [ router-id ] | srlg [ srlg-number ] [ igp-type { isis | ospf } ] | overload-node } command to check information about TEDBs that meet specified conditions and can be used by CSPF to calculate a path.
• Run the display mpls rsvp-te command to check RSVP information.
• Run the display mpls rsvp-te psb-content [ ingress-lsr-id tunnel-id [ lsp-id ] ] command to check information about the RSVP-TE PSB.
• Run the display mpls rsvp-te rsb-content [ ingress-lsr-id tunnel-id lsp-id ] command to check information about the RSVP-TE RSB.
• Run the display mpls rsvp-te established [ interface interface-type interface-number peer-ip-address ] command to check information about the established RSVP-TE CR-LSPs.
• Run the display mpls rsvp-te peer [ interface interface-type interface-number | peer-address ] command to check the RSVP neighbor parameters.
• Run the display mpls rsvp-te reservation [ interface interface-type interface-number peer-ip-address ] command to check information about RSVP resource reservation.
• Run the display mpls rsvp-te request [ interface interface-type interface-number peer-ip-address ] command to check information about RSVP resource reservation requests.
• Run the display mpls rsvp-te sender [ interface interface-type interface-number peer-ip-address ] command to check information about an RSVP transmit end.
• Run the display mpls rsvp-te statistics { global | interface [ interface-type interface-number ] } command to check RSVP-TE statistics.
• Run the display mpls te link-administration admission-control [ interface interface-type interface-number ] command to check tunnels established on the local node.
• Run the display affinity-mapping [ attribute affinity-name ] [ verbose ] command to check information about an affinity name template.
• Run the display mpls te tunnel [ destination ip-address ] [ lsp-id lsr-id session-id local-lsp-id | lsr-role { all | egress | ingress | remote | transit } ] [ name tunnel-name ] [ { incoming-interface | interface | outgoing-interface } interface-type interface-number ] [ verbose ] command to check tunnel information.
• Run the display mpls te tunnel statistics or display mpls lsp statistics command to check tunnel statistics.
• Run the display mpls te tunnel-interface command to check information about a tunnel interface on the ingress of a tunnel.