Deleting an Automatic Bypass Tunnel and Re-establishing a New One

If MPLS TE Auto FRR is enabled, a command is used to instruct a node to tear down an automatic bypass tunnel and reestablish a new one.

Procedure

  1. Run the reset mpls te auto-frr { lsp-id ingress-lsrid tunnel-id | name bypass-tunnel-name } command to tear down an automatic bypass tunnel and re-establish a new one.
Parent Topic: Maintaining MPLS TE
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >