Verifying the Configuration of Dynamic BFD for CR-LSP

After configuring dynamic BFD for CR-LSP, you can verify that a CR-LSP is Up and a BFD session is successfully established.

Run the display bfd session dynamic [ verbose ] command to check information about the BFD session on the ingress.
Run the display bfd session passive-dynamic [ peer-ip peer-ipremote-discriminator discriminator ] [ verbose ] command to check information about the BFD session passively created on the egress.
Check the BFD statistics.
- Run the display bfd statistics command to check statistics about all BFD sessions.
- Run the display bfd statistics session dynamic command to check statistics about dynamic BFD sessions.
Run the display mpls bfd session [ protocol rsvp-te | outgoing-interface interface-type interface-number ] [ verbose ] command to check information about the MPLS BFD session.