Enabling MPLS TE

Before setting up a static bidirectional co-routed LSP, you must enable MPLS TE.

Perform the following steps on each node along the CR-LSP:

Run system-view
The system view is displayed.
Run mpls
The MPLS view is displayed.
Run mpls te
MPLS TE is enabled on the node globally.

To enable MPLS TE on each interface, you must first enable MPLS TE globally in the MPLS view.
Run quit
Return to the system view.
Run interface interface-type interface-number
The interface view is displayed.
Run mpls
MPLS is enabled on the interface.
Run mpls te
MPLS TE is enabled on the interface.

When the MPLS TE is disabled in the interface view, all CR-LSPs on the current interface go Down.

When the MPLS TE is disabled in the MPLS view, the MPLS TE on each interface is disabled, and all CR-LSPs are deleted.
Run commit
The configuration is committed.