Configuring the Ingress of a Static Bidirectional Co-routed LSP

Procedure

1. Run system-view

   The system view is displayed.

2. Run bidirectional static-cr-lsp ingress tunnel-name

   A static bidirectional co-routed LSP is created, and the static bidirectional LSP view is displayed.

3. Run forward { nexthop next-hop-address | outgoing-interface interface-type interface-number } ^* out-label out-label-value [ bandwidth ct0 bandwidth | pir pir ] ^*

   A forward CR-LSP is configured on the ingress.

   The bandwidth parameter specifies the reserved bandwidth for a forward CR-LSP. The bandwidth value cannot be higher than the maximum reservable link bandwidth. Otherwise, the forward CR-LSP cannot go Up.

4. Run backward in-label in-label-value [ lsrid ingress-lsr-id tunnel-id ingress-tunnel-id ]

   A reverse CR-LSP is specified on the ingress.

5. (Optional) Run description text

   A description is configured for the static bidirectional co-routed CR-LSP.

6. Run commit

   The configuration is committed.