Enabling MPLS TE

Procedure

1. Run system-view

   The system view is displayed.

2. Run mpls

   The MPLS view is displayed.

3. Run mpls te

   MPLS TE is enabled on the node globally.

   Before you enable MPLS TE on each interface, enable MPLS TE globally in the MPLS view.

4. Run quit

   Return to the system view.

5. Run interface interface-type interface-number

   The interface view is displayed.

6. Run mpls

   MPLS is enabled on the interface.

7. Run mpls te

   MPLS TE is enabled on the interface.

   

   When the MPLS TE is disabled in the interface view, all CR-LSPs on the current interface go Down.

   When the MPLS TE is disabled in the MPLS view, the MPLS TE on each interface is disabled, and all CR-LSPs are torn down.

8. Run commit

   The configurations are committed.