Verifying the Static CR-LSP Configuration

After the configuration of a static CR-LSP, you can view the static CR-LSP status.

The static CR-LSP has been configured.

Run the display mpls static-cr-lsp [ lsp-name ] [ verbose ] command to check information about the static CR-LSP.
Run the display mpls te tunnel [ destination ip-address ] [ lsp-id ingress-lsr-id session-id local-lsp-id ] [ lsr-role { all | egress | ingress | remote | transit } ] [ name tunnel-name ] [ { incoming-interface | interface | outgoing-interface } interface-type interface-number ] [ verbose ] command to check information about the tunnel.
Run the display mpls te tunnel statistics or display mpls lsp statistics command to check the tunnel statistics.
Run the display mpls te tunnel-interface command to check information about the tunnel interface on the ingress.