Verifying the Automatic RSVP-TE Tunnel Configuration

After configuring an automatic RSVP-TE tunnel, you can check information about the RSVP-TE tunnel and its status statistics.

The automatic RSVP-TE tunnel functions have been configured.

Run the following commands to check the IS-IS-related label allocation information:
- display isis traffic-eng advertisements [ { level-1 | level-2 | level-1-2 } | { lsp-id | local } ] ^* [ process-id | [ vpn-instance vpn-instance-name ] ]
- display isis traffic-eng statistics [ process-id | [ vpn-instance vpn-instance-name ] ]
Run the display mpls te tunnel [ destination ip-address ] [ lsp-id lsr-id session-id local-lsp-id | lsr-role { all | egress | ingress | remote | transit } ] [ name tunnel-name ] [ { incoming-interface | interface | outgoing-interface } interface-type interface-number ] [ verbose ] command to check tunnel information.
Run the display mpls te tunnel statistics command to view TE tunnel statistics.
Run the display mpls te tunnel-interface [ tunnel tunnel-number ] command to check information about a tunnel interface on the ingress.