Verifying the DS-TE Configuration

After configuring DS-TE, you can verify DS-TE information and CT information of a tunnel.

All DS-TE functions have been configured.

Run the display mpls te ds-te { summary | te-class-mapping [ default | config | verbose ] } command to check DS-TE information.
Run the display mpls te te-class-tunnel { all | { ct0 | ct1 | ct2 | ct3 | ct4 | ct5 | ct6 | ct7 } priority priority } command to check information about the TE tunnel associated with TE-classes.
Run the display interface tunnel interface-number command to check CT traffic information on a specified tunnel interface.
Run the display ospf [ process-id ] mpls-te [ area area-id ] [ self-originated ] command to check OSPF TE information.
Run either of the following commands to check the IS-IS TE status:
- display isis traffic-eng advertisements [ lsp-id | local ] [ level-1 | level-2 | level-1-2 ] [ process-id | vpn-instance vpn-instance-name ]
- display isis traffic-eng statistics [ process-id | vpn-instance vpn-instance-name ]