Configuring Whitelist Session-CAR for gRPC Protocol Packets

You can set the whitelist session-CAR parameters for gRPC protocol packets to properly allocate bandwidth resources.

Run system-view
The system view is displayed.
Run grpc
The gRPC view is displayed.
Run whitelist session-car grpc { cir sessionCarCir | cbs sessionCarCbs | pir sessionCarPir | pbs sessionCarPbs } ^*
Whitelist session-CAR parameters are set for gRPC protocol packets.
Run commit
The configuration is committed.

After configuring whitelist session-CAR for gRPC, you can verify the configuration.

For IPv4:
Run the display cpu-defend whitelist session-car grpc statistics slot slot-id command to check statistics about whitelist session-CAR for gRPC on a specified interface board.

To view new statistics, run the reset cpu-defend whitelist session-car grpc statistics slot slot-id command to clear the existing statistics about whitelist session-CAR for gRPC on a specified interface board, and then run the display cpu-defend whitelist session-car grpc statistics slot slot-id command.
For IPv6:
Run the display cpu-defend whitelist-v6 session-car grpcv6 statistics slot slot-id command to check statistics about whitelist session-CAR for gRPC on a specified interface board.

To view new statistics, run the reset cpu-defend whitelist-v6 session-car grpcv6 statistics slot slot-id command to clear the existing statistics about whitelist session-CAR for gRPC on a specified interface board, and then run the display cpu-defend whitelist-v6 session-car grpcv6 statistics slot slot-id command.