Configuring an IPv6 Destination Collector

Context

When static subscription is configured, a device functions as a client and an IPv6 collector functions as a server. To statically subscribe to the data sampled or a customized event, you need to configure the IPv6 address and port number of an IPv6 destination collector, and the protocol and encryption mode for data sending.

Procedure

1. Run system-view

   The system view is displayed.

2. Run telemetry

   The telemetry view is displayed.

3. Run destination-group destination-group-name

   A destination group is created, and the destination group view is displayed.

4. Run ipv6-address ip-address-ipv6 port port [ vpn-instance vpn-instance ] [ protocol { grpc [ no-tls ] | udp } ]

   The IPv6 address and port number of an IPv6 destination collector and the protocol and encryption mode for data sending are configured.

   

   This command can be run for no more than five times for each destination group.

   Both this command and the protocol (subscription view) command can be run to configure a protocol and encryption mode for the destination collector. If the destination collector is associated with the subscription, command configurations take effect based on the following rules:

   • If the protocol (subscription view) command has been run in the subscription view, the protocol and encryption mode configured in the subscription view take effect.
   • If the protocol (subscription view) command is not run in the subscription view, the protocol and encryption mode configured in the destination-group view take effect.
   • Configuring the no-tls parameter may pose security risks.
5. Run commit

   The configuration is committed.