Creating a VLAN

Procedure

1. Run system-view

   The system view is displayed.

2. Run vlan vlan-id

   A VLAN is created, and the VLAN view is displayed. If the specified VLAN has been created, the VLAN view is directly displayed.

   The VLAN ID ranges from 1 to 4094. If VLANs need to be created in batches, you can run the vlan batch command to create VLANs in batches, and then run the vlan vlan-id command to enter the view of a specified VLAN.

   

   If a device is configured with multiple VLANs, do as follows to configure a name for each VLAN:

   Run the name vlan-name command in the VLAN view. After a VLAN name is configured, you can run the vlan vlan-name vlan-name command in the system view to enter the corresponding VLAN view.

3. Run commit

   The configuration is committed.