Creating a VLANIF Interface

Before configure Layer 3 features on a Layer 2 device, you must create a VLANIF interface on the device.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface vlanif vlan-id

    A VLANIF interface is created and the VLANIF interface view is displayed.

    The VLAN ID specified in this command must be the ID of an existing VLAN.

    A VLANIF interface is Up only when at least one physical port added to the corresponding VLAN is Up.

  3. Run commit

    The configuration is committed.

Parent Topic: Configuring Layer 3 Communication Between VLANIF Interfaces
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
Next topic >