(Optional) Configuring Bandwidth for a VLANIF Interface

After configuring bandwidth for VLANIF interfaces, you can use the NMS to query the bandwidth. This facilitates traffic monitoring.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface vlanif vlan-id

    The VLANIF interface view is displayed.

    The VLAN ID specified in this command must be the ID of an existing VLAN.

  3. Run bandwidth bandwidth

    The VLANIF interface is configured with bandwidth.

  4. Run commit

    The configuration is committed.

Parent Topic: Configuring Layer 3 Communication Between VLANIF Interfaces
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >