After configuring BGP VPLS, check VSI and VPLS connection
information.
Prerequisites
BGP VPLS has been configured.
Procedure
- Run the display vpls connection [ bgp | vsi vsi-name ] [ down | up ] [ verbose ] command to check VPLS connection information.
- Run the display vsi remote bgp [ nexthop nexthop-address { export-vpn-target vpn-target ] | route-distinguisher | route-distinguisher } command to check
remote VSI information.
- Run the display bgp
l2vpn-ad routing-table vpls command to check BGP L2VPN-AD route information.