Verifying the Inter-AS VPLS Configuration
After configuring inter-AS VPLS, check VSI and PW information.
Prerequisites
Inter-AS VPLS has been configured.
Procedure
Run the
display vsi
[
name
vsi-name
] [
verbose
] command to check VSI information.
Run the
display bgp l2vpn-ad peer
[ [
ipv4-address
]
verbose
] command on a PE or ASBR to check BGP VPLS peers information.
Run the
display vpls connection
[
bgp
|
vsi
vsi-name
] [
down
|
up
] [
verbose
] command on a PE to check PW information.
Run the
display bgp routing-table label
statistics
command on a PE or ASBR to check labeled IPv4 routes.
Run the
display vsi bgp-ad remote
vpls-id
vpls-id
command to check information about a specified remote PE.