After configuring an mVRRP6 group, verify the binding between the common VRRP6 and mVRRP6 backup groups and verify the configurations.
Prerequisites
An mVRRP6 group has been configured.
Procedure
- Run the display vrrp6 admin-vrrp6 command to check the information about the mVRRP6 group.
- Run the display vrrp6 binding admin-vrrp6 [ interface interface-type1 interface-number1 ] [ vrid virtual-router-id1 ] [ member-vrrp [ interface interface-type2 interface-number2 ] ] [ vrid virtual-router-id2 ] command to check the bindings between the mVRRP6 group and common VRRP6 backup groups.