You can view the status of an mVRRP group and verify the configuration.
Prerequisites
An mVRRP group has been configured.
Procedure
- Run the display vrrp binding admin-vrrp [ interface interface-type1 interface-number1 ] [ vrid virtual-router-id1 ] member-vrrp [ interface interface-type2 interface-number2 ] [ vrid virtual-router-id2 ] command to check the bindings between an mVRRP group and service VRRP groups.
- Run the display vrrp binding admin-vrrp [ interface interface-type1 interface-number1 ] [ vrid virtual-router-id ] member-interface [ interface interface-type2 interface-number2 ] command to check the bindings between an mVRRP group and VRRP-disabled interfaces.
- Run the display mpls l2vc track admin-vrrp [ interface interface-type1 interface-number1 vrid virtual-router-id ] command to check the bindings between an mVRRP group and service PWs.
- Run the display vrrp [ interface interface-type interface-number [ virtual-router-id ] ] [ brief ] command to check brief information about all VRRP groups or a specific one.