After configuring IPv6 VXLAN in centralized gateway mode using BGP EVPN, verify information about the IPv6 VXLAN tunnels, VNI status, and VBDIF interfaces.
Prerequisites
IPv6 VXLAN in centralized gateway mode has been configured using BGP EVPN.
Procedure
- Run the display bridge-domain [ binding-info | [ bd-id [ brief | verbose | binding-info ] ] ] command to check BD configurations.
- Run the display interface nve [ nve-number | main ] command to check NVE interface information.
- Run the display evpn vpn-instance command to check EVPN instance information.
- Run the display bgp evpn peer [ [ ipv6-address ] verbose ] command to check information about BGP EVPN peers.
- Run the display vxlan peer [ vni vni-id ] command to check the ingress replication lists of all VNIs or a specified one.
- Run the display vxlan tunnel [ tunnel-id ] [ verbose ] command to check IPv6 VXLAN tunnel information.
- Run the display vxlan vni [ vni-id [ verbose ] ] command to check IPv6 VXLAN configurations and the VNI status.