Configuring the VXLAN Alarm Function

To learn the VXLAN operating status in time, configure the VXLAN alarm function so that the NMS will be notified of the VXLAN status changes. This facilitates O&M.

Procedure

Run system-view
The system view is displayed.
Run snmp-agent trap enable feature-name nvo3 [ trap-name { hwnvo3vxlantnldown | hwnvo3vxlantnlup } ]
The VXLAN alarm function is enabled.
Run commit
The configuration is committed.

Verifying the Configuration

After the VXLAN alarm function is enabled, verify the VXLAN alarm status.

Run the display snmp-agent trap feature-name nvo3 all command to check configurations of all alarm functions of the VXLAN module.