After configuring VXLAN in centralized gateway mode for dynamic tunnel establishment, check VXLAN tunnel, VNI, and VBDIF interface information.
Prerequisites
VXLAN in centralized gateway mode has been configured for dynamic tunnel establishment.
Procedure
- Run the display bridge-domain [ binding-info | [ bd-id [ brief | verbose | binding-info ] ] ] command to check BD configurations.
- Run the display interface nve [ nve-number | main ] command to check NVE interface information.
- Run the display bgp evpn peer [ [ ipv4-address ] verbose ] command to check BGP EVPN peer information.
- Run the display vxlan peer [ vni vni-id ] command to check ingress replication lists of a VNI or all VNIs.
- Run the display vxlan tunnel [ tunnel-id ] [ verbose ] command to check VXLAN tunnel information.
- Run the display vxlan vni [ vni-id [ verbose ] ] command to check VNI information.
- Run the display interface vbdif [ bd-id ] command to check VBDIF interface information and statistics.
- Run the display mac-limit bridge-domain bd-id command to check MAC address limiting configurations of a BD.
- Run the display bgp evpn all routing-table command to check EVPN route information.